Commit e034b4bb authored by dmazzoni's avatar dmazzoni

Added an autoconf-based configure/make system -DMM


git-svn-id: https://subversion.assembla.com/svn/portaudio/portaudio/trunk@326 0f58301d-fd10-0410-b4af-bbb618454e57
parent 299ec8b8
#
# PortAudio Makefile.in
#
# Dominic Mazzoni
#
CC = @CC@
CFLAGS = @CFLAGS@ -Ipa_common
LIBS = @LIBS@
AR = @AR@
RANLIB = @RANLIB@
INSTALL = @INSTALL@
PREFIX = @prefix@
OTHER_OBJS = @OTHER_OBJS@
PALIB = libportaudio.a
PADLL = libportaudio.so
PADLLV = libportaudio.so.0.0.18
PAINC = pa_common/portaudio.h
COMMON_OBJS = \
pa_common/pa_convert.o \
pa_common/pa_lib.o
TESTS = \
bin/patest_buffer \
bin/patest_clip \
bin/patest_dither \
bin/patest_hang \
bin/patest_latency \
bin/patest_leftright \
bin/patest_longsine \
bin/patest_many \
bin/patest_maxsines \
bin/patest_multi_sine \
bin/patest_pink \
bin/patest_record \
bin/patest_ringmix \
bin/patest_saw \
bin/patest_sine8 \
bin/patest_sine \
bin/patest_sine_formats \
bin/patest_sine_time \
bin/patest_stop \
bin/patest_sync \
bin/patest_toomanysines \
bin/patest_underflow \
bin/patest_wire
OBJS = $(COMMON_OBJS) $(OTHER_OBJS)
all: lib/$(PALIB) lib/$(PADLLV) tests
tests: bin/ $(TESTS)
lib/$(PALIB): lib/ $(OBJS) Makefile $(PAINC)
$(AR) ruv lib/$(PALIB) $(OBJS)
$(RANLIB) lib/$(PALIB)
lib/$(PADLLV): lib/ $(OBJS) Makefile $(PAINC)
$(CC) -shared -o lib/$(PADLLV) $(OBJS)
$(TESTS): bin/%: lib/$(PALIB) Makefile $(PAINC) pa_tests/%.c
$(CC) -o $@ $(CFLAGS) pa_tests/$*.c lib/$(PALIB) $(LIBS)
install: lib/$(PALIB) lib/$(PADLLV)
$(INSTALL) -m 644 lib/$(PALIB) $(PREFIX)/lib/$(PADLLV)
$(INSTALL) -m 644 lib/$(PALIB) $(PREFIX)/lib/$(PALIB)
cd $(PREFIX)/lib && rm -f $(PADLL) && ln -s $(PADLLV) $(PADLL)
$(INSTALL) -m 644 pa_common/portaudio.h $(PREFIX)/include/portaudio.h
@echo ""
@echo "------------------------------------------------------------"
@echo "PortAudio was successfully installed."
@echo ""
@echo "On some systems (e.g. Linux) you should run 'ldconfig' now"
@echo "to make the shared object available. You may also need to"
@echo "modify your LD_LIBRARY_PATH environment variable to include"
@echo "the directory $(PREFIX)/lib"
@echo "------------------------------------------------------------"
@echo ""
clean:
rm -f $(OBJS) $(TESTS) lib/$(PALIB)
%.o: %.c Makefile $(PAINC)
$(CC) -c $(CFLAGS) $< -o $@
bin:
mkdir bin
lib:
mkdir lib
This diff is collapsed.
This diff is collapsed.
This diff is collapsed.
dnl
dnl PortAudio configure.in script
dnl
dnl Dominic Mazzoni
dnl
dnl Require autoconf >= 2.13
AC_PREREQ(2.13)
dnl Init autoconf and make sure configure is being called
dnl from the right directory
AC_INIT([pa_common/portaudio.h])
dnl Checks for programs
AC_PROG_CC
AC_PROG_RANLIB
AC_PROG_INSTALL
AC_PATH_PROG(AR, ar, no)
if [[ $AR = "no" ]] ; then
AC_MSG_ERROR("Could not find ar - needed to create a library");
fi
dnl Extra variables we want to substitute
AC_SUBST(OTHER_OBJS)
TARGETS="tests"
dnl Determine the host operating system / platform
AC_CANONICAL_HOST
case "${host_os}" in
darwin* )
dnl Mac OS X configuration
OTHER_OBJS="pa_mac_core/pa_mac_core.o";
LIBS="-lm";
;;
*)
dnl Unix OSS configuration
AC_CHECK_LIB(pthread, pthread_create,
,
AC_MSG_ERROR([libpthread not found!]))
OTHER_OBJS="pa_unix_oss/pa_unix_oss.o";
LIBS="-lm -lpthread";
esac
AC_OUTPUT([Makefile])
echo ""
echo "Finished configure."
echo ""
echo "Type 'make' to build PortAudio and examples."
#!/bin/sh
#
# install - install a program, script, or datafile
# This comes from X11R5 (mit/util/scripts/install.sh).
#
# Copyright 1991 by the Massachusetts Institute of Technology
#
# Permission to use, copy, modify, distribute, and sell this software and its
# documentation for any purpose is hereby granted without fee, provided that
# the above copyright notice appear in all copies and that both that
# copyright notice and this permission notice appear in supporting
# documentation, and that the name of M.I.T. not be used in advertising or
# publicity pertaining to distribution of the software without specific,
# written prior permission. M.I.T. makes no representations about the
# suitability of this software for any purpose. It is provided "as is"
# without express or implied warranty.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch. It can only install one file at a time, a restriction
# shared with many OS's install programs.
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit="${DOITPROG-}"
# put in absolute paths if you don't have them in your path; or use env. vars.
mvprog="${MVPROG-mv}"
cpprog="${CPPROG-cp}"
chmodprog="${CHMODPROG-chmod}"
chownprog="${CHOWNPROG-chown}"
chgrpprog="${CHGRPPROG-chgrp}"
stripprog="${STRIPPROG-strip}"
rmprog="${RMPROG-rm}"
mkdirprog="${MKDIRPROG-mkdir}"
transformbasename=""
transform_arg=""
instcmd="$mvprog"
chmodcmd="$chmodprog 0755"
chowncmd=""
chgrpcmd=""
stripcmd=""
rmcmd="$rmprog -f"
mvcmd="$mvprog"
src=""
dst=""
dir_arg=""
while [ x"$1" != x ]; do
case $1 in
-c) instcmd="$cpprog"
shift
continue;;
-d) dir_arg=true
shift
continue;;
-m) chmodcmd="$chmodprog $2"
shift
shift
continue;;
-o) chowncmd="$chownprog $2"
shift
shift
continue;;
-g) chgrpcmd="$chgrpprog $2"
shift
shift
continue;;
-s) stripcmd="$stripprog"
shift
continue;;
-t=*) transformarg=`echo $1 | sed 's/-t=//'`
shift
continue;;
-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
shift
continue;;
*) if [ x"$src" = x ]
then
src=$1
else
# this colon is to work around a 386BSD /bin/sh bug
:
dst=$1
fi
shift
continue;;
esac
done
if [ x"$src" = x ]
then
echo "install: no input file specified"
exit 1
else
true
fi
if [ x"$dir_arg" != x ]; then
dst=$src
src=""
if [ -d $dst ]; then
instcmd=:
chmodcmd=""
else
instcmd=mkdir
fi
else
# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if [ -f $src -o -d $src ]
then
true
else
echo "install: $src does not exist"
exit 1
fi
if [ x"$dst" = x ]
then
echo "install: no destination specified"
exit 1
else
true
fi
# If destination is a directory, append the input filename; if your system
# does not like double slashes in filenames, you may need to add some logic
if [ -d $dst ]
then
dst="$dst"/`basename $src`
else
true
fi
fi
## this sed command emulates the dirname command
dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
# Make sure that the destination directory exists.
# this part is taken from Noah Friedman's mkinstalldirs script
# Skip lots of stat calls in the usual case.
if [ ! -d "$dstdir" ]; then
defaultIFS='
'
IFS="${IFS-${defaultIFS}}"
oIFS="${IFS}"
# Some sh's can't handle IFS=/ for some reason.
IFS='%'
set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
IFS="${oIFS}"
pathcomp=''
while [ $# -ne 0 ] ; do
pathcomp="${pathcomp}${1}"
shift
if [ ! -d "${pathcomp}" ] ;
then
$mkdirprog "${pathcomp}"
else
true
fi
pathcomp="${pathcomp}/"
done
fi
if [ x"$dir_arg" != x ]
then
$doit $instcmd $dst &&
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi
else
# If we're going to rename the final executable, determine the name now.
if [ x"$transformarg" = x ]
then
dstfile=`basename $dst`
else
dstfile=`basename $dst $transformbasename |
sed $transformarg`$transformbasename
fi
# don't allow the sed command to completely eliminate the filename
if [ x"$dstfile" = x ]
then
dstfile=`basename $dst`
else
true
fi
# Make a temp file name in the proper directory.
dsttmp=$dstdir/#inst.$$#
# Move or copy the file name to the temp name
$doit $instcmd $src $dsttmp &&
trap "rm -f ${dsttmp}" 0 &&
# and set any options; do chmod last to preserve setuid bits
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $instcmd $src $dsttmp" command.
if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi &&
if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi &&
if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi &&
if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi &&
# Now rename the file to the real destination.
$doit $rmcmd -f $dstdir/$dstfile &&
$doit $mvcmd $dsttmp $dstdir/$dstfile
fi &&
exit 0
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment